Labdhi Engineering Co.
Masjid Bandar, Mumbai, Maharashtra
GST No. 27ACUPV3780C1Z1
TrustSEAL Verified
Call 0804860264574% Response Rate
SEND EMAIL
Product Details:
| Shape | Rectangle |
| Max Pressure | 35 Kg/sq.cm |
| Max Temperature | 380 deg C |
| Size | 1500 mm x 2000 mm |
| Thickness | 0.4mm - 6mm |
Available in a standard size of 1.5m x 2m. Sheet size 2m x 6m available against order.
Technical Data:
Product Details:
| Material | Rubber |
| Thickness | 0.4mm - 6mm |
| Size | 1500 mm x 2000 mm |
| Temperature (deg. Celsius) | 440 degree C |
| Max Pressure | 80 Kg/sq.cm |
Product Details:
| Thickness | 1mm to 5mm |
| Size | 1500mm X 2000mm |
| Shape | Rectangular |
| Brand | Champion |
| Country of Origin | Made in India |
A high quality jointing sheet based on synthetic Aramid fibres bonded with NBR elastomer.
Colour: Orange
Service Conditions
Suitable for use in applications involving hydrocarbons such as oils and solvents, steam, gases, glycols and aqueous solutions. (Medium Service Conditions).
MAX. OPERATING PRESSURE80 barsMAX. SHORT TERM SERVICE TEMP.450oCMAX. CONTINUOUS SERVICE TEMP.250oCMAX. OPERATION TEMP. FOR STEAM200oCTypical Physical Properties
| Density | - | 1.85 g/cm3 |
| Tensile Strength | ASTM F 152 | 10 Mpa |
| Compressibility | ASTM F 36 | 8% |
| Residual Stress | BS 7531 | 22 Mpa |
| Gas Permeability | BS 7531 | <0.5 cc/Min |
| Recovery | ASTM F 36 | ≥40% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤35% |
Product Details:
| Minimum Order Quantity | 100 Kg |
| Thickness | 1 mm to 5 mm |
| Size | 1500 x 1500 mm |
| Temperature | 100 |
| Max Operating Pressure | 500 |
| Brand | Champion |
A superior performance compressed jointing sheet incorporating a blend of special heat resisting Aramid fibres with a high quality nitrile elastomer binder.
Service Conditions
Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acids and alkalies. (High Service Conditions).
Typical Physical Properties
| Density | - | 2g/cm3 |
| Tensile Strength | ASTM F 152 | 15 - 17 Mpa |
| Compressibility | ASTM F 36 | 7-11% |
| Residual Stress | BS 7531 | 25 Mpa |
| Gas Permeability | BS 7531 | <0.1 cc/Min |
| Recovery | ASTM F 36 | ≥55% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤35% |
Additional Information:
Product Details:
| Thickness | 1 to 5 mm |
| Size | 1500 x1500 |
| Temperature | 200 |
| Max Operating Pressure | 400 |
| Brand | Champion |
A Premium grade jointing sheet based on special synthetic Aramid fibres bonded with nitrile elastomer.
Colour: Grey
Service Conditions
A universal grade suitable for many industrial sealing applications. Media : Hot oils, fuels, Hydrocarbons and refrigerants. (High Service Conditions)
MAX. OPERATING PRESSURE150 barsMAX. SHORT TERM SERVICE TEMP.400oCMAX. CONTINUOUS SERVICE TEMP.250oCMAX. OPERATION TEMP. FOR STEAM250oCTypical Physical Properties
| Density | - | 1.7 g/cm3 |
| Tensile Strength | ASTM F 152 | 10 Mpa |
| Compressibility | ASTM F 36 | 10-14% |
| Residual Stress | BS 7531 | 25 Mpa |
| Gas Permeability | BS 7531 | <0.1 cc/Min |
| Recovery | ASTM F 36 | ≥45% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤35% |
Product Details:
| Temperature | 400 Degree C |
| Thickness | 0.4 - 5.0 mm |
| Application | High Pressure |
| Shape | Rectangular |
Product Details:
| Thickness | 1-5mm |
| Size | 1500 x1400 mm |
| Temperature | 200 |
| Max Operating Pressure | 500 |
A cost effective product manufactured from ecofriendly natural cellulosic fibres bonded with suitable mix of elastomers.
Colour: Red & Green
Service Conditions
General purpose gasketing material suitable for use with Oils, Solvents, Gases, Water, L.P.Steam and most dilute acids and alkalies (Low service conditions).
MAX. OPERATING PRESSURE25 barsMAX. SHORT TERM SERVICE TEMP.300oCMAX. CONTINUOUS SERVICE TEMP.250oCMAX. OPERATION TEMP. FOR STEAM180oC
Typical Physical Properties
Density-1.75 g/cm3Tensile StrengthASTM F 1527 MpaCompressibilityASTM F 368%Residual StressBS 753122 MpaGas PermeabilityBS 7531RecoveryASTM F 36≥45%Water AbsorpationBS 7531≤5%Ignition Loss-≤40%
Product Details:
| Minimum Order Quantity | 3 PIECE |
| Thickness | 0.5 - 0.10 mm |
| Size | 1500 mm x 2000 mm |
| Recommended Max Temperature | 415C |
| Max Pressure | 40 Kg/sq.cm |
A compressed synthetic Aramid fibre jointing sheet bonded with elastomers to create a matrix of stability.
Colour: Green
Service Conditions
Suitable for light industrial applications. Media : Water, Gases, Medium pressure Steam, Dilute Acids/Alkalies (Medium Service Conditions).
MAX. OPERATING PRESSURE50 barsMAX. SHORT TERM SERVICE TEMP.400oCMAX. CONTINUOUS SERVICE TEMP.250oCMAX. OPERATION TEMP. FOR STEAM200oCTypical Physical Properties
| Density | - | 1.9 g/cm3 |
| Tensile Strength | ASTM F 152 | 9 Mpa |
| Compressibility | ASTM F 36 | 8% |
| Residual Stress | BS 7531 | 22 Mpa |
| Gas Permeability | BS 7531 | <0.5 cc/Min |
| Recovery | ASTM F 36 | ≥45% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤30% |
A superior performance compressed jointing sheet incorporating a blend of special heat resisting Aramid fibres with a high quality nitrile elastomer binder.
Colour: Yellow
Service Conditions
Suitable for use with Oils, Solvents, Gases, Steam, Dilute Acids and alkalies. (High Service Conditions).
MAX. OPERATING PRESSURE150 barsMAX. SHORT TERM SERVICE TEMP.450oCMAX. CONTINUOUS SERVICE TEMP.250oCMAX. OPERATION TEMP. FOR STEAM250oCTypical Physical Properties
| Density | - | 1.8 g/cm3 |
| Tensile Strength | ASTM F 152 | 10 Mpa |
| Compressibility | ASTM F 36 | 7-11% |
| Residual Stress | BS 7531 | 25 Mpa |
| Gas Permeability | BS 7531 Grade X | <0.1 cc/Min |
| Recovery | ASTM F 36 | ≥50% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤35% |
A top quality acid resistant compressed synthetic Aramid fibre jointing sheet bonded with special binders
Colour: Cream
Service Conditions
Acid resistant grade. Recommended for use against hot, Concentrated organic/inorganic/mineral acids.
MAX. OPERATING PRESSURE150 barsMAX. SHORT TERM SERVICE TEMP.250 oCMAX. CONTINUOUS SERVICE TEMP.210 oCMAX. OPERATION TEMP. FOR STEAM210 oCTypical Physical Properties
| Density | - | 1.8 g/cm3 |
| Tensile Strength | ASTM F 152 | 10 Mpa |
| Compressibility | ASTM F 36 | 8% |
| Residual Stress | BS 7531 | 25 Mpa |
| Gas Permeability | BS 7531 | <0.1 cc/Min |
| Recovery | ASTM F 36 | ≥50% |
| Water Absorpation | BS 7531 | ≤5% |
| Ignition Loss | - | ≤35% |
Product Details:
| Continuous Service Temp | 250deg C |
| Operation Temperature | 180deg C |
| Short Term Service Temp | 400deg C |
| Operating Pressure | 25 bars |