Cutting Tools

Product Details:

The Morse taper allows the bit to be mounted directly into the spindle of a drill, lathe tailstock, or (with the use of adapters) into the spindle of milling machines. It is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift. The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit. A range of sleeves may be used to bring the size of the smaller Morse tapers up to the size of the drive spindle's larger taper. Sockets are also available to extend the effective length of the drill as well as offering a variety of taper combinations.

Product Details:

We Stock complete range of Morse taper twist drill bits which are used in metalworking. The full range of tapers is from 0 to 7. Dia 3-100mm The Morse taper allows the bit to be mounted directly into the spindle of a drill, lathe tailstock, or (with the use of adapters) into the spindle of milling machines. It is a self-locking (or self holding) taper of approximately 5/8" per foot that allows the torque to be transferred to the drill bit by the friction between the taper shank and the socket. The tang at the end of the taper is only for ejecting the drill bit from the spindle, with the aid of a drift. The arbor of a drill chuck is often a Morse taper and this allows the chuck assembly to be removed and directly replaced with the shank of a Morse taper drill bit. A range of sleeves may be used to bring the size of the smaller Morse tapers up to the size of the drive spindle's larger taper. Sockets are also available to extend the effective length of the drill as well as offering a variety of taper combinations.

Product Details:

HSS / Cobalt Drills - Taper Shank A Morse Taper Shank drill incorporates a standardized taper shank design that is used in tapered drill chucks. The Morse Taper was invented by Stephen A. Morse (also the inventor of the twist drill) in the mid-1860s. Morse Tapers come in eight sizes identified by number between 0 and 7. Often this is abbreviated as MT followed by a digit, for example a Morse taper number 4 would be MT4. The MT2 taper is the size most often found in drill presses up to 1/2' capacity.

Product Details:

Supported by our dexterous team and hi-tech infrastructure, we are bringing forward an optimum quality array of Drilling Tools. This drilling tool is high on demand in the market for its excellent performance. We manufacture this drilling tool by using high grade material and technologically advanced tools in conformity with the international standards. We provide this drilling tool on diverse specifications for fulfill the demand of customers.

Features:

• High efficiency
• Superb finish
• Long lasting

Additional Information:

• Item Code: 203

Product Details:

A hacksaw is a fine-toothed saw, originally and mainly made for cutting metal. ... On hacksaws, as with most frame saws, the blade can be mounted with the teeth facing toward or away from the handle, resulting in cutting action on either the push or pull stroke.

Product Details:

Backed by the talented team of professionals, we are involved in offering best quality of HSS Bore Type Milling Cutter. This HSS Bore Type Milling Cutter is extensively used for metal cutting. Further, the offered products are available in the market in wide range at most affordable rates.

 

Features:

• Well furnished
• Qualitative raw material
• Minimal cost

Product Details:

We are the authorized distributors of Gedore from where we procure and supply a wide range of Tools Box Trolley. Designed to perfection, these Gedore Tool Trolley are dimensionally accurate, reliable and convenient to use. Furtherrmore, our clients can always rely on optimal material properties, perfect ergonomics, maximum safety and long life in Gedore tools.

Specifications:

• Especially suitable for repair, service and maintenance on cars T
• Tools in metric sizes
• Developed from everyday workshop routine
• Working platform in ABS with 3 compartments for small parts
• With handle for easy pushing, pulling and turning
• With seven drawers: 5x type 1 height 67 mm, 1x type 2 height 137 mm and 1x type 3 height 207 mm
• Single-hand operation with safety locking which prevents the drawers
• from opening when in motion
• Both side walls with square perforation to fix torque wrenches or T
• other long tools and accessories
• Central locking with cylinder lock T
• Heel protection and all-round impact protection T
• GEDORE heavy-duty chassis with high-performance wheels on roller bearings, with 2 fixed castors Ø 200 mm and 2 swivel castors Ø 125 mm, one with total brake
• Total load capacity 500 kg T

Additional Information:

• Item Code: 187
• Production Capacity: 10
• Delivery Time: 1 days
• Packaging Details: BOX

Product Details:

Our expert team allows us to manufacture a wide range of engraving (dixi polytools). We use superior quality raw materials in manufacturing these tools. Our tools have the following features, such as, pointed edges, accuracy in dimension and durability. engraving tools are used in making elegant and bright designs on metal sheets, wood and stones. These products are widely accepted due to its cost-worthy price range.

Additional Information:

• Item Code: 205

Product Details:

Features:

• Concave Milling Cutters
• Convex Milling Cutters
• Double Corner Rounding Milling Cutters
• Double Equal Angle Milling Cutters
• Double unequal angle Milling Cutters
• Side & Face Milling Cutters
• Shell End Mill
• Shell End Single angle Milling Cutters
• Side and Face Milling Cutters (Straight Teeth)
• Single Angle Milling Cutters
• Single Corner Rounding Milling Cutters
• Staggered Teeth Side & Face Milling Cutters
• CP Milling Cutters
• DP Milling Cutters
• Drill Fluting Milling Cutters
• Module Milling Cutters
• Reamer Fluting Milling Cutters
• Rotary Form Milling Cutters
• Tap Fluting Milling Cutters

Additional Information:

• Item Code: 213

Product Details:

From our extensive range of products, we put forth supreme grade Hacksaw Blades which are marked at industry leading price.

 

Features:

• Superb cutting performance

• Sharp edges

• Rust resistance

• Optimum quality

• Excellent strength

• Trouble free functionality

Product Details:

As per the requirements of the customers, we are involved in offering the best quality of Bi-Metal Band Saw. The offered Bi-Metal Band Saw is available in the market in bulk at most reasonable rates. Bi-Metal Band Saw is extensively used for cutting of various items, the given hacksaw blade is provided in numerous.

 

Features:

• Excellent finishing
• Nominal cost
• Highly demand

Product Details:

Jobber Length Drills These high performance twist drills are suitable for all normal drilling in coven-tional materials.

Product Details:

Bottoming tap or Adison / IT Tap Sets The tap illustrated in the top of the image has a continuous cutting edge with almost no taper between 1 and 1.5 threads of taper is typical. This feature enables a bottoming tap to cut threads to the bottom of a blind hole. A bottoming tap is usually used to cut threads in a hole that has already been partially threaded using one of the more tapered types of tap; the tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole. In the US, they are commonly known as bottoming taps, but in Australia and Britain they are also known as plug taps. Intermediate tap, second tap, or plug tap^[4] The tap illustrated in the middle of the image has tapered cutting edges, which assist in aligning and starting the tap into an untapped hole. The number of tapered threads typically ranges from 3 to 5. Plug taps are the most commonly used type of tap. In the US, they are commonly known as plug taps, whereas in Australia and Britain they are commonly known as second taps. Taper tapThe small tap illustrated at the bottom of the image is similar to an intermediate tap but has a more pronounced taper to the cutting edges. This feature gives the taper tap a very gradual cutting action that is less aggressive than that of the plug tap. The number of tapered threads typically ranges from 8 to 10. A taper tap is most often used when the material to be tapped is difficult to work (e.g., alloy steel) or the tap is of a very small diameter and thus prone to breakage.

Product Details:

Used for light and heavy deep slot operations in steel and in most soft material. These side & face cutters are extensively used in the production such as tool & cutter grinder milling machine, lathe machine, hexa machine and beach grinder machine and are available in varying diameters and widths.

Features:

• We use top quality raw material and our products are known for their excellent performance and optimum quality.

 

Brief About Product:

• The side-and-face cutter is designed with cutting teeth on its side as well as its circumference. They are made in varying diameters and widths depending on the application. The teeth on the side allow the cutter to make unbalanced cuts (cutting on one side only) without deflecting the cutter as would happen with a slitting saw or slot cutter (no side teeth).

Product Details:

Model Types Available 1.Material HSS M2; M35; M42; ASP 30 & 60 2.Available in Class AA; A; B & C as per DIN 3968 or equivalent AGMA, JIS standard Brief about Products Looking for good quality gear cutting hobs We provide solutions to all your gear cutting needs in all International Standards. We also customize and manufacture special profile hobs as per customer requirements. The gear hobs are manufactured depending on type of gear teeth to be cut. Custom made hobs are suited to make gears with modified tooth profile. The tooth profile is modified to add strength and reduce size and noise of gears. The general purpose hobs are manufactured as per standards. Maxwell manufactures the complete range of hobs under one roof. Hob cutters are essential in the production of gearwheels and toothed components. However, the performance of tools over their entire life cycle depends crucially on the quality of reconditioning. Our company has appointed a Maxwell Service team who has been supporting the use of hob cutters and ensures reconditioning and recoating to original quality.

Product Details:

We are one of the leading organizations engaged in providing HSS Twist Drill. This drill that we offer is manufactured by using high grade material. This HSS Twist Drill is widely appreciated by our clients all round the nation. The use of the offered drill is to penetrate easily and smoothly in hard surfaces. This drill is admired for their noiseless operations. Likewise, this drill is easily available at most reasonable prices. Features: Parallel shank Drills are recommended for use with hand drilling Machine in drilling thin sections, sheet metals, Car and Bus bodies etc.Range: 1.0 mm to 22.0 mm (inches 3/64" to 7/8") with 8 tolerances specifications confirm to IS 5101:2002 ISO 235:1980 BS 328 Part 1:1993 DIN 338:1984Taper Shank Drills: Standard Morse Taper Shank Drills milled flute drill for general purpose application on Steel and Cast Steel, alloyed and non-alloyed. Grey case Iron, German Silver Steel, Graphite etc. Taper Shank Long Series Drills specifications confirm to IS 8305:2002 DIN 341:1978 Range: 3.0 mm to 103.0 mm (inches 1/8"to 4").

Product Details:

Internal threading is done by using a tool called a TAP in a hole drilled to a specific diameter for the thread size and pitch you want to cut. External threads, such as for bolts and studs, are made by using a tool called a DIE, which is applied to a specific diameter of rod for the size and pitch of the threads you want to cut.

Product Details:

Below are our recommendations for the 4 best drill bits for stainless steel on the market:

• Neiko Titanium Step Drill Bit.
• Bosch Cobalt Twist Drill Bit.
• Dewalt 14-Piece Cobalt Pilot Point Drill Bit.
• Drill America Shank Drill Bit.
• Things to Consider When Buying Drill Bits for Steel.
• Conclusion on Drill Bits for Stainless Steel.

Product Details:

Bottoming tap or Bottoming tap. The tap illustrated in the top of the image has a continuous cutting edge with almost no taper between 1 and 1.5 threads of taper is typical.This feature enables a bottoming tap to cut threads to the bottom of a blind hole. A bottoming tap is usually used to cut threads in a hole that has already been partially threaded using one of the more tapered types of tap; the tapered end ("tap chamfer") of a bottoming tap is too short to successfully start into an unthreaded hole. In the US, they are commonly known as bottoming taps, but in Australia and Britain they are also known as plug taps. Intermediate tap, second tap, or plug tap The tap illustrated in the middle of the image has tapered cutting edges, which assist in aligning and starting the tap into an untapped hole.

Product Details:

Cut Thread Machine Screw Taps (HSS) Features:

• Straight fluted, hand taps
• Taps produce a class 2B thread

Product Details:

Cut Thread Machine Screw Taps (HSS).

Features:

• Straight fluted, hand taps
• Taps produce a class 2B thread

Product Details:

Reamer is a tool for enlarging holes and is used in metalworking. We are into the manufacturing of different kinds of reamerlike adjustable reamers, Tapping Reamers, Ridge Reamers, Judy Reamers etc. We are also a reputed hand reamers manufacturer. Our reamer’s usability in various machines for various applications like in lathe machine for turning, growing and threading have placed us among prominent machine reamers exporters from India.

Features:

• Hand reamers are tools for manual reaming; they are typically equipped with a handle
• Specifications conform to: IS 5444:2002 ISO 236/1:1976 BS 328 PART 4:1990 DIN 206:1976
• Taper pin reamers are ground with a standard taper, most commonly 1/4" per foot, for fitting pins with the standard taper
• Specifications Conform to: IS 5881:1989 ISO 3465:1975 BS 328 PART 4: 1990 DIN 9:1975
• Bridge reamers are heavy-duty reamers used for construction, shipbuilding, and other heavy industrial applications. They are often used for alignment of holes for rivets or other structural fasteners
• Specifications conform to: IS 5919:2002 ISO 2238:1972 BS 328 PART 4:1990
• Chucking reamers are the most common reamer type, and are used for general-purpose reaming Chucking reamers typically come with a straight shank
• Specifications Conform to: IS 5447:2002 ISO 521:1975 BS 328 parts 4:1990

Type Available:

• Chucking Reamers
• Machine Reamers
• Taper pin reamers
• Hand reamers
• Shell Reamers

Product Details:

Reamer is a tool for enlarging holes and is used in metalworking. We are into the manufacturing of different kinds of reamerlike adjustable reamers, Tapping Reamers, Ridge Reamers, Judy Reamers etc. We are also a reputed hand reamers manufacturer. Our reamer’s usability in various machines for various applications like in lathe machine for turning, growing and threading have placed us among prominent machine reamers exporters from India.

Features:

• Hand reamers are tools for manual reaming; they are typically equipped with a handle
• Specifications conform to: IS 5444:2002 ISO 236/1:1976 BS 328 PART 4:1990 DIN 206:1976
• Taper pin reamers are ground with a standard taper, most commonly 1/4" per foot, for fitting pins with the standard taper
• Specifications Conform to: IS 5881:1989 ISO 3465:1975 BS 328 PART 4: 1990 DIN 9:1975
• Bridge reamers are heavy-duty reamers used for construction, shipbuilding, and other heavy industrial applications. They are often used for alignment of holes for rivets or other structural fasteners
• Specifications conform to: IS 5919:2002 ISO 2238:1972 BS 328 PART 4:1990
• Chucking reamers are the most common reamer type, and are used for general-purpose reaming Chucking reamers typically come with a straight shank
• Specifications Conform to: IS 5447:2002 ISO 521:1975 BS 328 parts 4:1990

Product Details:

We bring forth a wide range of improved HSS Threading Tap in the industry. The offered tap is used for internal thread form creation. Under the manufacturing process of the tap, the use of such metals is done that gives high thread output. The most commonly used areas of this HSS Threading Tap are bolt, nit and screw. With the use of this tap the work can be quickly done. Besides, the offered tap has longer service life.

Features:

• The process of cutting the threads in a hole is called "tapping" the hole. We offer a full range of taps for the creation of internal thread forms. Coarse Thread Series UNC and Metric M is the most commonly used thread system in the majority of screws, bolts and nuts
• The UNC coarse thread is often used for quick assembly or disassembly
• Fine Thread Series UNF and Metric Fine MF is used for applications that require higher tensile strength than the coarse thread series and where thin walls are required
• Using only premium substrate materials such as cobalt, powdered metal cobalt and carbide, taps are designed to last longer and provide high quality thread results. Our taps are produced to both IS and DIN specifications for a variety of applications

Product Details:

Features:

• The counterbores with solid pilot are designed for machining as fillister screw caps or ejector caps in molds
• Available in inches 1/2" - 2.1/2" and in MM from 12-65mm
• Coating is available for better life of tool

Product Details:

Features:

• Flutes - Spiral cutting edge on the end mill. 2 and 4 flute end mills are the most commonly used.
• 2-Flute - Allows maximum space for chip ejection. Used for general milling operations.
• 3-Flute - Excellent for slotting. Used for general milling operations.
• 4, 5, 6, and 8 Flute - A greater number of flutes reduces chip load and can improve surface finish, if feed rate remains the same.
• Ball End - Used to mill die cavities and fillets, round bottom holes and slots.
• Carbide - This tool material combines increased stiffness with the ability to operate at higher SFPM. Carbide tools are best suited for shops operating newer milling machines or machines with minimal spindle wear. Rigidity is critical when using carbide tools. Carbide end mills may require a premium price over the cobalt end mills, but they can also be run at speeds 2 1/2 faster than HSS end mills. For best results mount in a hydraulic type holder.
• Coatings - The use of Titanium coated tools will increase the surface hardness of the tool to near 85 Rc. This will allow for greater tool life at increased cutting speeds & feeds (15 - 25%). Melin offers Titanium Nitride (TiN), Aluminum Titanium Nitride (AlTiN), and Titanium Carbonitride (TiCN).
• Cobalt - Type of high speed steel tool which has a 8% cobalt content (M42). This material has excellent abrasion resistance for improved tool life over standard high speed steel (M7).
• Corner Radius - Conventional end mill with radius ground on the tips of the flutes to help reduce chipping on the tip. For mold applications, radius tools can remove more material faster than ball ends.
• Corner Rounders - Cutters having form ground radius with relieved clearance.
• High Helix - Usually a 40 to 60 degree spiral on the tool's flutes. Effective for rapid chip ejection in milling of aluminum and other materials.
• HSS - A baseline tool steel. In the past, a majority of end mills were made from standard High Speed Steel (M7). Usually inexpensive, but do not offer the tool life or speed and feed advantages of Cobalt and Carbide end mills.
• Left-Hand Spiral - Used for milling multiple layers of thin sheets where chip flow is directed away from work.
• Rougher (Hoggers) - End mill with interrupted shape on outside diameter to remove large amounts of material quickly. Typically can remove material up to three times the rate of conventional end mills with different types available to achieve the desired finish on the material. Melin offers roughers in Coarse Pitch, Fine Pitch, Rougher/Finisher, and 3-Flute for Aluminum styles.
• Single End - Teeth on one end of the cutter only. This style is the most common available.
• Stub Length - Used for milling of shallow slots in all types of materials where heavy feeds are required and tool deflection is minimized.